RAINMAN Electric (230V 50Hz) Pressure Supply Naked Unit

RAINMAN Electric (230V 50Hz) Pressure Supply Naked Unit

RAINMAN Electric (230V 50Hz) Pressure Supply Naked Unit

2.704,00

Σε απόθεμα

2.704,00

RAINMAN Watermaker Electric Pressure Supply Unit

BRAND: Rainman
Διαθεσιμότητα: Σε απόθεμα Κωδικός προϊόντος: 901-0048625 Κατηγορίες: ,
ΒΑΡΟΣ ΠΡΟΪΟΝΤΟΣ: 16.6kg

Περιγραφή

RAINMAN NAKED 230V 50Hz Electric Pressure Supply Unit

230V – 50HZ ELECTRIC NAKED DESALINATOR

If you want to permanently install your system, do not require future portability, and want a minimum footprint installation, the Rainman Naked watermaker is a good option. Any of the electric pressure supply units can come in the Naked configuration.

This system has the same internals and performance as the traditional Rainman system, with an integrated lift pump so there is only one motor to switch on.

The Rainman Naked system excludes the blue shells, and includes a variety of valves and hardware useful for your installation.

Three main components (pump/motor, prefilter, RO unit) can be mounted separately from each other. The valve/gauge controls are to be mounted remotely, so the watermaker can remain out of sight.

Water Everywhere
Rainman watermakers are a compact and portable solution designed to generate a fresh water supply from seawater.
Our system consists of a Pressure Supply Unit (PSU) and a Reverse Osmosis Unit (RO). The PSU draws water up, filters it, and pressurises it for the RO unit, which extracts fresh potable water for your tanks. With the brackish water flow gauge, you can use the system in seawater, brackish water, or freshwater applications.

Built to last
We use only top quality components from the best manufacturers: Honda, DuPont FILMTEC, General Pump, Noshok, and Parker. Our filters, membranes and replacement parts are non-proprietary for ease of service worldwide.

Versatile
Our system can be easily transferred between boats or used in remote land based applications. Keep your watermaker when you change your boat.

The Rainman Advantage
Our simple and robust system is designed for ease of use and low maintenance. This fresh approach to desalination eliminates unnecessary componentry and electronics. Not only will the initial cost of a Rainman watermaker be lower than other systems, but the simple design and high build quality reduces ongoing maintenance costs.

Flexibility
Choose to install your system or run it portable, allowing you to reduce weight while not cruising.

Reliability
Using simple pumps and no electronics maximises the uptime of your watermaker.

Economical
Modest initial price and low maintenance requirement minimises life cycle cost.

High output
Up to 140 litres per hour (37 gph).

Investment retention
Keep your watermaker when you change boats.

Totally enclosed fan cooled (TEFC) induction motor.
Draws 1300 watts in steady state operation.
Designed to run with minimum of a Honda 2kW generator or a quality 2kVA inverter.
Pre-filter and housing.
Jabsco impeller pump to lift water and provide positive pressure to the high pressure pump.
General Pump WMR series 316 stainless steel high pressure pump, the workhorse of the RO industry.
General Pump relief valve to prevent overpressurisation and allow for pressure washing.
Sturdy 5 metre draw hose fitted with one way valve so it remains primed, with detachable strainer.
Five 5 micron pleated paper pre-filter cartridges included.
1kg (2.2 lb) bag pickling solution powder included.

Dimensions
Length: 470mm (18.5″)
Width: 240mm (9.5″)
Height: 270mm (10.7″)
Weight: 24.5kg (54lb)

*Couples with one of our reverse osmosis membranes, ordered separately.

Το προϊόν προστέθηκε στο καλάθι σας: