26-34lt/hr Electric (12V DC) Pressure Supply Unit Economy RAINMAN

26-34lt/hr Electric (12V DC) Pressure Supply Unit Economy RAINMAN

26-34lt/hr Electric (12V DC) Pressure Supply Unit Economy RAINMAN

5.385,00

Out of stock

5.385,00

RAINMAN Watermaker Electric Pressure Supply Unit

BRAND: Rainman
Availability: Out of stock SKU: 901-0050402 Categories: ,
WEIGHT: 35kg

Description

RAINMAN 12V DC Electric Pressure Supply Unit

12V DC ELECTRIC DESALINATOR

This lower power, lower output system is ideal for use when you are running solar / battery for your main power source.

Water Everywhere
Rainman watermakers are a compact and portable solution designed to generate a fresh water supply from seawater.
Our system consists of a Pressure Supply Unit (PSU) and a Reverse Osmosis Unit (RO). The PSU draws water up, filters it, and pressurises it for the RO unit, which extracts fresh potable water for your tanks. With the brackish water flow gauge, you can use the system in seawater, brackish water, or freshwater applications.

Built to last
We use only top quality components from the best manufacturers: Honda, DuPont FILMTEC, General Pump, Noshok, and Parker. Our filters, membranes and replacement parts are non-proprietary for ease of service worldwide.

Versatile
Our system can be easily transferred between boats or used in remote land based applications. Keep your watermaker when you change your boat.

The Rainman Advantage
Our simple and robust system is designed for ease of use and low maintenance. This fresh approach to desalination eliminates unnecessary componentry and electronics. Not only will the initial cost of a Rainman watermaker be lower than other systems, but the simple design and high build quality reduces ongoing maintenance costs.

Flexibility
Choose to install your system or run it portable, allowing you to reduce weight while not cruising.

Reliability
Using simple pumps and no electronics maximises the uptime of your watermaker.

Economical
Modest initial price and low maintenance requirement minimises life cycle cost.

Investment retention
Keep your watermaker when you change boats.

Permanent magnet TEFC DC Motor

410 watts steady state power consumption

Current draw 30 amps

Power cord length: 1.4 metres including battery connectors

Integrated flexible impeller lift pump

2 metre (6 ft) maximum lift above sea level

High pressure pump 316 stainless steel

316SS/ceramic relief valve to prevent overpressurisation

Sound levels – 58dB at 6 metres (20 ft)

Case of sturdy injection moulded polypropylene

PSU mounting seat: fibreglass reinforced nylon with strap

RO Case (mountable if desired): rotomoulded polyethylene

10x2.5″ 5m prefilter to remove sediment mounted on PSU

0-40lph (11gph) product water flow meter, into RO case

Valve/gauge control assembly integrated into RO case

5 metre (16 ft) intake hose fitted with one way valve to remain primed, with detachable strainer

3 metre (10 ft) brine waste discharge hose

Dimensions of PSU:
Length: 600mm (23.6″)
Width: 270mm (10.6″)
Height: 375mm (14.8″)
Weight: 24kg (53lb)

Dimensions of membranes:
Length: 1180mm (46.5″)
Width: 250mm (9.8″)
Height: 130mm (5.1″)
Weight: 11kg (24lb)

 

You've just added this product to the cart: